TECHNICAL SPECIFICATIONS - WOOD HOUSES NATURA

Info:(+34)96 145 2817 (Valencia) | (+34)97 777 2840 (Tarragona) | (+34)91 841 2477 (Madrid) Email:info@casasnatura.com

CHASSIS:

Structure:
Structure built with perimeter black iron profile C 100 x 50 x 5mm.
Structure constructed with iron beams black double T profile 100 x 50 x 5mm.
Internal grid structure constructed with iron profile in black T 50 x 50 x 5mm.

Setting:
Fixing pieces if arc welding electrodes with 2.5 X 350mm.

Finish:
Antioxidant black paint on two applications.

OBJETIVE:
The structure once granted guarantees strength and weight needed to support the house and needs it.

WALL:

STRUCTURE:
The soul of the panel built with particle board of wood founded, OSB, 18 mm thick
Inside revetment (flat) tables pine 150X 23.5 mm (dry wood oven)
Outer revetment (curved) tables pine 150X 23.5 mm (dry wood oven)

SETTING:
All wood has rabbet which allows better assemblage of parts. Glued and nailed (generation of solid panel).

FINISH:
Internal implementation of open pore satin varnish (product water filter UV).

OBJETIVE:
There is a wall of higher strength and better structural behaviour the natural agents such as temperature changes, fire, etc.

FLOOR:

STRUCTURE:
Marine board built with support of 18 mm thickness is mounted on chassis. Installation of polyurethane foam of 3 mm thick.

PARQUET:
Flat 14 mm thick with 3 separate layers of 4 mm top layer of wood.

SETTING:
The holder is attached to the iron frame with polyurethane caulk. The parquet adheres only rabbet unions.

FINISH:
Parquet with 5 layers of reinforced acrylic varnish UV.

OBJETIVE:
This produces a finish that allows for minimal maintenance compared to increased usage. Easy to clean without chemicals.

SKY:

STRUCTURE:
Wooden beams separated each 80 cm X 55 mm 150 pine (dry wood oven)

COATING:
Exterior metal tile comprising:
* Support of galvanized steel to the bathroom Double sided.
* Acrylic Resin
* Rock Granules
* Acrylic binder and the fungicide
* System accredited under ISO 9002.

INTERIOR:
Pine Table 150 x 23.5 mm thick rabbet.

INSULATION:
Rock wool 80 mm thick.
Air chamber 40 mm. Membrane impermeable Dupont - Tyvek type deck
Of the tile itself (granules of rock)

FINISH:
The exterior metal roof termination.
Inside implementation of open-pore varnish on pine boards against (Product water)

OBJETIVE:
Is achieved not only comply with the idea of resistance to wind and rain but In addition you get a roof, that product of the technology used in its materials, reduces the noise pollution caused by the beating of the water and snow. Chemical treatment of shingles also eliminates the possible formation fungus on the cover.

DOOR (A):

A - STRUCTURE:
Boarded pine wood.

A - SET:
Ensembles glued and pressed.

A - FINISH:
Polished and varnished, termination mate (product water) If colour is applied.

WINDOW (B):

B - STRUCTURE:
Selected woods for outdoor use such as iroko, framiré, pine Plan, boss, etc.With the raw material at his optimum moisture achieved through artificial drying, the values of 12 to 14 degrees.

B - INSULATION:
Climalit glazed windows with air chamber of 10 mm (insulation Thermal and acoustic) 4 x 10 x 4

B - FINISH:
Dual vacuum coating equipment, which is in the timber following The most modern treatment processes such as a first process or vasolizado, consisting of an in-depth treatment of organic solvents containing biocide, insecticides and fungicides to protect wood against insects and fungi, and also fitted with interveners such as resins and waxes that repel water and humidity.

B - OBJETIVE:
Obtained with this system a door or window of optimum quality and structural deformations are eliminated future product assembly as well as ill-posible leakage of air or noise. The glass tube allows us to considerably reduce the external noise

INSTALLATION:

PLUMBING SYSTEM:
Installation is performed with polyethylene pipes of 16 mm WC Systems connecting pipes of stainless steel without the presence of adhesive Exits to the outside connections made with PVC pipes of 40 mm or 110 mm as appropriate drain or supply. System accredited under ISO 9002.

WC:
Complete WC set SANGO Boreal dimensions and characteristics as manufacturer. Complete with sink and mirror cabinet dimensions and characteristics as manufacturer. Bath or shower trays full size and characteristics according to the manufacturer. Thermo Electric FAGOR THERMO 50 0 or 30 liters depending on model and footage of home

KITCHEN:
Hood, electric cooker and oven and characteristics as measures TEKA manufacturer. Stainless steel sink, characteristics and measures according to manufacturer The sink is mounted on a bench table and their postformed bottom gates are set from the same material and finish. Aquanova single lever taps, dimensions and characteristics as manufacturer.

OBJETIVe:
Artifacts as well as the facility gives us the security and safety support, giving us the benefits of using products that are in the forefront of the market for safety and aesthetics.

ELECTRICAL INSTALLATION:

GENERALITY:
We have taken into account the new Electrotechnical FOR REGULATION LOW TENSION, published in the Official Gazette, dated 18.09.2002. The facility is built on the flexible cable Mansura to light points, sockets and control mechanisms. Complete installation of flexible cable with 3 faces of 1.5 - 2.5 - 4.00 - 6.00 5 circuit; Lighting Outlets-kitchen-washer and oven-heater -- Wetlands. Capacity of 40 amperes.

ARTICLES:
Plugs as manufacturer and model features. Switches according to manufacturer and model features W 60 bulbs Differential and automatic HAGER

OBJETIVE:
The separation of the circuits allows us to add or remove artifacts without the risk of affecting the overall capacity of the house. Resistance of installed items is much higher than those that have bear a rational use against them.

VARNISHES:

GENERAL:
Product water open pore water with fungicide and UV filter Completion matt hue of choice.

APLICATION:
3 hands sprayed with air pistol (water)

MAINTENANCE:
Externally every 4 years of product implementation Inside each 20 years of product implementation

OBJETIVE:
The use of these coatings allows the wood to breathe in a natural way, ensuring that you maintain the natural moisture you need wood for non-deformation of any kind.